為什麼DeLorean的效果並非總是以88 mph的速度開始?


5

為什麼,DeLorean的效果並不總是以88 mph的速度開始。例如,在Back to the Future 3中,效果以65 mph的速度開始。同樣,當馬蒂(Marty)到1955年逃離利比亞時,這種影響以86英里/小時的速度開始。另外一次是當Doc和Marty用火車推動DeLorean時,這種效果以每小時82英里的速度開始。為什麼時間旅行效果會在不同時間開始?

6

The problem is that you are comparing technically different time-machines.

Over the course of the trilogy the DeLorean was changed 2 times.
So we have:

  1. The original powered by plutonium (1985)
  2. Upgraded version powered by Mr. Fusion (2015)
  3. MacGyver version with a vacuum control unit (1955/1885)

Versions 1 and 2 behave the same way:
Reach 88 mph > Flux Capacitor lights up > Flux effects start > Time travel

There do appear to be delays between achieving 88 mph, Flux Capacitor lighting up, and Fux effects, but I would credit them to the 1.21 gigawatts power requirement - it may take the different power sources different times to achieve the 1.21 gigawatts. Or there is perhaps some auto/manual setting (after all Doc would not want to time travel every time he hits 88 mph).

The significant exceptions is when lightning is involved:
1955 to 1985 was instant, once the lightning energy was received; also the 1955 to 1885 time travel - when the lightning hit the car was just hovering but still due to energy overload the time transfer was achieved.

The problems start to appear with Version 3, this Frankenstein's monster is not only old, but many parts were replaced with 1955 technology,...

So it easily understood that there are bugs.
One is that the flux buildup/effects need to start sooner, before 88 mph is achieved.


1

In the third movie the time circuits were replaced with analog 1955 parts. Presumably this analog time circuit doesn't have the clean "on-off" functionality as the original version built into a microchip. It makes sense that it's function would slowly ramp up. You can also see that the flux capacitor slowly brightens instead of immediately lighting up like in the first movie.

This is one detail that, IMO, they did a very good job on.