我要刨一個古董端粒肉塊,我應該坐什麼飛機


1

我購買了一塊舊的肉塊,該肉塊對頂部造成了嚴重損壞。我想將塊翻轉過來,使另一側光滑,成為新的頂部。屠宰塊的構造以端面紋理為工作表面。

我是木工的新手,想購買一架能很好地完成這項工作並讓我終身受益的飛機。從到目前為止的閱讀情況來看,我想要一架千斤頂飛機(就像史丹利5號飛機)。是這樣嗎?

感謝所有建議。

2

Technicaly, you would be able to do it with a good smoothing plane with very tight mouth and really sharp blade - low angle plane could help (but only if the real cutting angle was lower than on "normal" plane - which it often isn't - because of bevel up blade).

But as was pointed out in comments (which I think should really be answers), sanding may be much easier option and I would recommend that.

If you decide for hand-planing - sharpening (again, as was pointed out in the comments) is really essential - almost every new plane blade needs sharpening no matter if it's new or used (some new low-quality plane blades will in fact need more sharpening than well maintained used ones). And sharpening is very, very complex issue, and mastering it may take a long time. I would suggest just searching "how to sharpen plane" on youtube - there are many ways, and it's up to you to find out what will work for you - so just go and watch some - https://www.youtube.com/results?search_query=plane+sharpening