3/4硬木的細木工法


0

我想用楓木建造一個桌面,但8/4楓木相當昂貴,因此我選擇厚度的一半。然而,這縮小了用於連接板以製造表面的選項的範圍。我應該使用什麼方法來連接這3/4個木板? 3/4的厚度足以使口袋孔連接起來可行嗎?優選地,該技術不應該涉及專門的機器或工具。

2

I'd suggest joining 3/4 maple planks into a table top exactly the same way you'd join 8/4 maple planks. Cut the edges nice and square, joint them to ensure they're 100% flat, then glue them up and apply every clamp you (and everyone in your neighborhood) own. Some gluing cauls will help to ensure it stays nice and flat while you're clamping and the glue is setting.

A jointer would make squaring the edges easier, but this would likely fall into "specialized tools", so you can do it with a jointer's plane. Of course, that may be considered "specialized", too, so you'll have to draw the line somewhere on what's "specialized" vs "how nice do you want your table top to be". If you don't get those edges really square, your glue-up won't be flat, then you'll have to sand or plane it flat and will end up with a less than 3/4" thick surface.

I wouldn't use pocket screws for any of it (even though I just picked up a pocket screw jig a couple of months ago).